Specifications

Software
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

6" vacuum chuck
Pair PH500 micropositioners with vacuum base
Optional Kinetic Vibration isolation table add $1600.
Optional Infinity 2-3 3.3mp color camera with monitor, PC, and software
Mitutoyo FS60 stereozoom with APO 10x/20x objectives
MOTIC fiber optic illuminator
Vacuum manifold

The SUSS PM5 is a probing station for electrical (DC and HF) measurements on wafers, chips and substrates up to 150 mm.
It has two SUSS ProbeHeads placed on the stable platen, with space for additional probes if necessary.
The platen height can be adjusted up to 40 mm allowing a quick and easy setup of the system.
The additional contact separation of 200 μm ensures accurate fine adjustment of the probe platen.
The 2 ProbeHeads (X, Y, Z movements) are connected to the platen by vacuum.
A metal bridge, which spans the width of the probe system and is fastened to the base, supports the microscope.
The scope is equipped with ExtraLongWorkingDistance 10x, 20x, 50x objectives and 10x ocular.
The stage locks into place and provides additional fine adjustment in the Z direction.
A pull-out stage permits quick and ergonomic loading and unloading of your DUT.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 73
Last activity Nov. 21, 2024

Description

6" vacuum chuck
Pair PH500 micropositioners with vacuum base
Optional Kinetic Vibration isolation table add $1600.
Optional Infinity 2-3 3.3mp color camera with monitor, PC, and software
Mitutoyo FS60 stereozoom with APO 10x/20x objectives
MOTIC fiber optic illuminator
Vacuum manifold

The SUSS PM5 is a probing station for electrical (DC and HF) measurements on wafers, chips and substrates up to 150 mm.
It has two SUSS ProbeHeads placed on the stable platen, with space for additional probes if necessary.
The platen height can be adjusted up to 40 mm allowing a quick and easy setup of the system.
The additional contact separation of 200 μm ensures accurate fine adjustment of the probe platen.
The 2 ProbeHeads (X, Y, Z movements) are connected to the platen by vacuum.
A metal bridge, which spans the width of the probe system and is fastened to the base, supports the microscope.
The scope is equipped with ExtraLongWorkingDistance 10x, 20x, 50x objectives and 10x ocular.
The stage locks into place and provides additional fine adjustment in the Z direction.
A pull-out stage permits quick and ergonomic loading and unloading of your DUT.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Software
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 73
Last activity Nov. 21, 2024

Here is a selection of similar machines

SUSS PM5 Manual Prober