TCM Central Tech

Listing description

MAIN FEATURES Printing width
1000mm Nr. printing decks
6 Repeat range
340mm – 700mm Gear pitch
10mm Central Drum
Chrome plated OD 1656 mm Ball bearings screws , positive guides Mechanical speed
250 mt/min Up-down registers
Motorized by stepping motors Side registers
Motorized by stepping motors 4 stepping motors each deck with encoders position feedback Horizontal sequential impression release Chambered doctor blades
Yes, covered by PTFE ( Teflon ) Drying system
Dual gas drying system
MAXON-IMECO Edge guider at infeed
Off-set pivot edge guider at the in-feed (RE) Edge guider at outfeed
Off-set pivot edge-guider at the out-feed (RE) Web Video Camera
by FIFE 3CCD Pre register system according preset repeat Quick changeover of printing sleeves in the press without removing mandr Quick changeover of anilox sleeves without removing mandrels Two chill rolls OD 230 mm driven by own motor and load cell feed

REPEAT GEARS Nr.
Repeat 12
390 6
400 6
450

Mandrels for repeat sleeves Nr. 6
OD

98.792 mm

WINDER / UNWINDER STATION Unwinder
Auto splice turret un-winder Winder
Auto splice turret re-winder Max OD at unwinder
1270 mm Max OD at winder
800 mm Air shafts

2x ICD 70 mm 5xICD 76 mm 2xICD 152 mm Electric loading-unloading systems for the reels at un-wind/rewind

INK STATION Ink trays
Nr. 06 Ink pumps
Nr. 06 electric ex-proof pumps

ANILOX SLEEVES (diameter 150mm) Nr. 08
Ceramic coated anilox rollers angle 60°

OTHER Electric double hoists to change cylinders
Incluede Thermo-control unit for CI drum
Yes ( chiller not included ) In line score slitter ( HELIOS ) with 3 positions and trim remover fan Overhead driven rollers

platform around overhead

stairs

Wiring: Eurovoltage
400V/3ph+g/50Hz

This equipment is located in IT