Traub TNC42DGY cnc lathe Verified seller Low working hours

Price on request

Make an offer

Manufacturer	Traub
Model	TNC42DGY
Year	2001
Location	Germany
Category	Lathes - cnc lathes
Product id	P250114025
Language	cnc струг Traub TNC42DGY Soustruh cnc Traub TNC42DGY Traub TNC42DGY cnc drejebænk Traub TNC42DGY Drehmaschine CNC cnc τόρνος Traub TNC42DGY Traub TNC42DGY cnc lathe Torno cnc Traub TNC42DGY Tour cnc Traub TNC42DGY cnc tokarski stroj Traub TNC42DGY Traub TNC42DGY cnc eszterga Tornio cnc Traub TNC42DGY cnc tekinimo staklės Traub TNC42DGY Traub TNC42DGY cnc-draaibank Tokarka CNC Traub TNC42DGY Torno CNC Traub TNC42DGY strung cnc Traub TNC42DGY Traub TNC42DGY Токарный станок с ЧПУ cnc strug Traub TNC42DGY Traub TNC42DGY cnc svarv Cnc torna Traub TNC42DGY

Details
About this seller

Specifications

Type of CNC	Traub TX8H 32 bit CNC
Spindle taper
Number of turrets	2
Number of tools on turret	14
Turning speed	5600 rpm
Spindle motor power	18.5 kW
Tailstock	no
Bar feeder	no
-------------------
Worked hours	8000 hours
Hours under power
State	as-is, where-is
At local norms	---------
Status

Description

- 2x 14-station turret with rotating tool drive VDI25

- C-axisAxis on main/counter spindle

- Y-axis on turret 1

- 173E Clamping tops on main/counter spindle
Hollow clamping cylinder, Hydrafeed Multifeed MX-1B Short bar loader fully integrated, including steady rest for longer bar lengths

- Additional coolant pump and attachments for coolant flushing/washing through the counter spindle, complete with Deublin type rotary coupling.

- Chip conveyor

- Spare parts list, circuit diagram, ATC optics

Standard equipment included

• Traub TX8H 32 bit CNC control system

• A.C. drive motor for main spindle, with 18.5 kW at 1:5.2 constant rating

• Main Spindle with spindle nose to DIN 55026 A5 and 42mm bar

capacity and infinitely variable spindle speed to Maximum 5600 RPM

• Hydraulic operated hollow chucking cylinder

• S1 Upper and S2 Lower compound slides with two A.C. servo drives

via ball screws and with digital feed back. X and Z axis slide-ways with

linear motion bearing guides.

• 2 x 14 Station turret with tool registers for parallel shank to DIN 69880-

25 to accept VDI25 tooling (16 x 16 cross section tooling as standard)

• Opposed headstock spindle with spindle nose register to DIN 55026-

A5 with 42mm spindle capacity, A.C. drive motor with 11 kW at 1:8

constant rating, movement in Z direction. (V axis) NC controlled with AC

servo drive and ballscrew, including hydraulically operated hollow

chucking cylinder.

• High pressure coolant unit for S1 and S2 turrets, with one 12 bar

pressure pump and separate coolant tank. Coolant supply through

turrets.

Standard equipment included (cont.)

• Hydraulic system

• Swarf conveyor with 1200mm discharge height

• Pivoting control operating panel with colour display screen

• Sliding cover over working area incorporating a viewing panel made of

laminated safety glass, with safety locking device

• Machine light

• Traub ‘ATC’ optical tool position measuring device

• The machine complies with the valid regulations for prevention of

accidents and is CE approved

• Electrical equipment, as per VDE/EN 60204 standards, wired to suit a

400 volt, 3 phase 50 cycle A.C. supply 24 volt control voltage.

• Interface for data transmission to peripheral equipment via V24 (25-

Polar/RS232)

• USB floppy disc drive emulator for data transmission to USB memory

stick

Attachments / Options included

• Numerically controlled rotating and positioning attachment for

main spindle and opposed spindles (C-Axis)

• Drive for rotating tools for turret S1 and turret S2 by 4Kw servo motor

(Infinitely variable programming speeds to maximum 5600 RPM)

• Y axis for off centre milling operations +/- 35mm travel fitted to turret 1.

• Collet Chucks – Rohm 173E collet chucks and attaching parts for main

spindle and opposed spindle.

• Additional coolant pump and attachments for coolant flush / wash

through opposed spindle, complete with high speed Deublin type rotary

coupling.

• Parts Gripper for removing the finished part from the opposed spindle.

Hydraulically operated.

• Finished Parts Conveyor for transporting the finished part out of the

machining area.

• Traub ‘Polyform’ Software for simplified programming of complex

milled profiles .

• Automatic cover hydraulically operated with safety edge. (Replaces

standard sliding cover.)

• Hydrafeed Multifeed MX-1B short bar loader fully interfaced,

including steady for longer bar lengths

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Client type	Reseller
Active since	2016
Offers online	20
Last activity	Jan. 14, 2025

Description

Specifications

Type of CNC	Traub TX8H 32 bit CNC
Spindle taper
Number of turrets	2
Number of tools on turret	14
Turning speed	5600 rpm
Spindle motor power	18.5 kW
Tailstock	no
Bar feeder	no
-------------------
Worked hours	8000 hours
Hours under power
State	as-is, where-is
At local norms	---------
Status

About this seller

Client type	Reseller
Active since	2016
Offers online	20
Last activity	Jan. 14, 2025

Traub TNC42DGY cnc lathe Verified seller Low working hours

Specifications

Description

Description

Specifications

About this seller

Here is a selection of similar machines

Categories

Menu

Traub TNC42DGY cnc lathe