Unipac U2080 Tube filler Verified seller

Description

Plastic tube filler
UNIPAC brand
Model U2080
Year 2003
Filling machine for cream, gel and paste type products
Rate 80 strokes/minute
9-station turntable
Tube loader magazine
Insertion station, orientation station, sinking station, filling station and automatic tube heat-sealing station
Touch screen control panel
40 liter hopper in 316L
Minimum dosage 3 ml max. 273ml
Max. temperature hot air 590°C
400 v three-phase / 27 Amp / Power 10.7 Kw / 50 Hz
Compressed air 6/8 bar (about 600 liters/minute)
Water about 2 liters/min.
16 decibels
Instruction manual supplied
Dimensions Filling machine 2000 x 1300 x 2400 mm adjustable feet
Dimensions Charger 1600 x 900 x 2100 mm adjustable feet
TOOLS
4 hoses DN15 clamp connection (valve and spout)
Buckets K Ø 40 + driver + IEK orientator
Cups L Ø 25 40 ml long + pusher + rocker + tip + heating support
E buckets Ø 40 + driver + orientator + IEK tilter + heating ring Ø 40 for IEK format
Buckets C Ø 30 + pusher x 2 + tipper + tip + heating supports + 3 sets of bucket bottoms
J buckets Ø 16 + tilter + driver + orientator + heating head
Buckets G Ø 35 incomplete
Buckets D Ø 50 + driver + orientator x 2 + tilter ND + heater Ø 50 ND + heating ring
Buckets M Ø 25 + tipper
Buckets I Ø 40
Buckets N Ø 50
Buckets B Ø 22 + bottom of buckets + tipper + heater + tip + orientator + driver
Buckets A Ø 19 + 10 bucket bottoms A + 2 driver tips A + 2 orienting tips A + heating ring Ø 19 + heating head support A + tipper A
Loader wheels B Ø 22
Loader wheels IEK Ø 40
Loader wheels J Ø 16
Loader wheels ND Ø 50
Loader wheels C Ø 30
Loader wheels A Ø 19
Loader wheels L/M Ø 25
Vibrating plate wheel X 2
Plate holding tube in loader + loader plate
– Spout A Ø 14
– Spout Ø 28
– Spout G Ø 19
– Spout Ø 22
– Spout Ø 25
– Spout Ø 30
– Spout Ø 11
– Spout Ø 16
(Ø measurement taken on the outside of the spout and not Ø of the tube)
1 box of different parts: seals, incomplete cups, engine
1 case of different letters A, B, C, D, E, P – Number from 0 to 9 – wedges