Specifications

Rotary table (4th axis) no
Type of CNC
Spindle taper
-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

Description

This 3-axis Victor Vcenter 70 - APC vertical machining center was manufactured in 2004. It features a rapid traverse rate of 30/30/24 m/min, a cutting feed rate up to 5000 mm/min, and an automatic tool changer with a 24-tool capacity. The machine includes a BT.40 spindle, rigid tapping, and a flood coolant system. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter 70 - APC machine we have for sale. Contact us for more information.

Machine weight: 4000 kg
Brand: FANUC
Model: Oi-MD control
Number of axis: 3
Chip conveyor: Yes
Automatic tool changer
Tool magazine capacity: 24 / Tool selection system: Random bi-directional / Tool diameter, maximum: 76 mm / Tool length, maximum: 250 mm / Tool weight, maximum: 7 kg
Spindle tooling: BT.40 / Tool change time: 2.5 sec
Rigid tapping / Flood coolant system / Totally enclosed guarding / Automatic Power Off system / Automatic lubrication system
Centralised pendant operation panel / Built-in work light / Levelling blocks / Tool box and hand tools / Warning light
Operating manual, parts list, Fanuc manuals / Coolant flush on bottom guarding / Air conditioner for electrical cabinet / Spindle oil cooler (Habor)
Chip conveyor & cart - left disposal / Oil Skimmer / Handy coolant gun (Shower gun) / Tool length measurement (Renishaw TS-27R)
Coolant Tank capacity: 100 litres / Pump delivery rate: 80 litres / Pump motor: 1/4 hp / Hydraulics Tank capacity: 30 litres / Pressure Maximum: 35 Kg/sq.cm

Rapid traverse rate x/y/z: 30/30/24 m/min / cutting feed rate: 1-5000 mm/min
Floor space required: 1950 x 2020 mm
Overall machine height: 2715 mm
Electrical: 415 volt, 3 phase, 50 cycles 40 amp line service
Air: 80 psi min, 1/2" air supply line min

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 1010
Last activity Dec. 22, 2024

Description

This 3-axis Victor Vcenter 70 - APC vertical machining center was manufactured in 2004. It features a rapid traverse rate of 30/30/24 m/min, a cutting feed rate up to 5000 mm/min, and an automatic tool changer with a 24-tool capacity. The machine includes a BT.40 spindle, rigid tapping, and a flood coolant system. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter 70 - APC machine we have for sale. Contact us for more information.

Machine weight: 4000 kg
Brand: FANUC
Model: Oi-MD control
Number of axis: 3
Chip conveyor: Yes
Automatic tool changer
Tool magazine capacity: 24 / Tool selection system: Random bi-directional / Tool diameter, maximum: 76 mm / Tool length, maximum: 250 mm / Tool weight, maximum: 7 kg
Spindle tooling: BT.40 / Tool change time: 2.5 sec
Rigid tapping / Flood coolant system / Totally enclosed guarding / Automatic Power Off system / Automatic lubrication system
Centralised pendant operation panel / Built-in work light / Levelling blocks / Tool box and hand tools / Warning light
Operating manual, parts list, Fanuc manuals / Coolant flush on bottom guarding / Air conditioner for electrical cabinet / Spindle oil cooler (Habor)
Chip conveyor & cart - left disposal / Oil Skimmer / Handy coolant gun (Shower gun) / Tool length measurement (Renishaw TS-27R)
Coolant Tank capacity: 100 litres / Pump delivery rate: 80 litres / Pump motor: 1/4 hp / Hydraulics Tank capacity: 30 litres / Pressure Maximum: 35 Kg/sq.cm

Rapid traverse rate x/y/z: 30/30/24 m/min / cutting feed rate: 1-5000 mm/min
Floor space required: 1950 x 2020 mm
Overall machine height: 2715 mm
Electrical: 415 volt, 3 phase, 50 cycles 40 amp line service
Air: 80 psi min, 1/2" air supply line min

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Rotary table (4th axis) no
Type of CNC
Spindle taper
-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 1010
Last activity Dec. 22, 2024

Here is a selection of similar machines

➤ Used Victor Vcenter 70 - APC For Sale | gindumac.com