Specifications

Metal length 6000 mm
Metal width 2000 mm
Max steel thickness 60 mm
Type of source Plasma
Source model Kjellberg HiFocus 280i
Type of CNC
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

Table size: 6,000 x 2,000 mm (+ overlaps in both axes of the order of 50mm)

Plasma source: Kjellberg HiFocus 280i (Plasma firing from sheet thickness 1mm at 35A up to 60mm at 280A) including cooling.

Autogen option: YES. Separate burner part of the machine. Mostly not used in our country.

Extraction and Filtration: fully automatic TEKA system (tower for 4 replaceable filter cartridges)

Compressor: Käser SM9

Machine load: On average max. 6 hours per day (less than 1
shift)

Used only for black steel in qualities S235 and S355. Mixture of Air and Oxygen. Nitrogen (for autogen) and Argon (for
marking) hoses are also included

. Currently, the machine is running normally, without defects, we can demonstrate. All critical Kjellberg components regularly serviced (source, control unit, gas mixers, valves,
burner) by an authorized Czech service.

The only thing that deserves a minor service is the HeightControl system, which ensures automatic correction of the burner height for very bent sheets. However, it is nothing major, it does not hinder us in our work.

The machine is programmed either on the machine screen or from the office through third-party software (an additional license must be purchased, we do not provide it). However, we offer full cooperation in this area.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2023
Offers online 53
Last activity Nov. 8, 2024

Description

Table size: 6,000 x 2,000 mm (+ overlaps in both axes of the order of 50mm)

Plasma source: Kjellberg HiFocus 280i (Plasma firing from sheet thickness 1mm at 35A up to 60mm at 280A) including cooling.

Autogen option: YES. Separate burner part of the machine. Mostly not used in our country.

Extraction and Filtration: fully automatic TEKA system (tower for 4 replaceable filter cartridges)

Compressor: Käser SM9

Machine load: On average max. 6 hours per day (less than 1
shift)

Used only for black steel in qualities S235 and S355. Mixture of Air and Oxygen. Nitrogen (for autogen) and Argon (for
marking) hoses are also included

. Currently, the machine is running normally, without defects, we can demonstrate. All critical Kjellberg components regularly serviced (source, control unit, gas mixers, valves,
burner) by an authorized Czech service.

The only thing that deserves a minor service is the HeightControl system, which ensures automatic correction of the burner height for very bent sheets. However, it is nothing major, it does not hinder us in our work.

The machine is programmed either on the machine screen or from the office through third-party software (an additional license must be purchased, we do not provide it). However, we offer full cooperation in this area.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Metal length 6000 mm
Metal width 2000 mm
Max steel thickness 60 mm
Type of source Plasma
Source model Kjellberg HiFocus 280i
Type of CNC
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2023
Offers online 53
Last activity Nov. 8, 2024

Here is a selection of similar machines

Voortman VCS Thermo Cutting machine - Plasma / gas