Weiler Commodor lathe Verified seller

Description

Weiler Commodor Leit and pull spindle lathe
3 axis digital display from K&C NEW
Super condition
>> Built in 1985
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 45 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55027 size 6 with bayonet lock
>> Tailstock MK 4
>> Feeds from 0.026 to 0.888 mm /rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 2000 kg
>> Spindle brake can be switched on
>> Drive power 7.5 KW
>> Length 2.2 m, height 1.5 m, depth 1 m

Accessories and equipment:
>> 3-axis digital display from K&C New, 12 month manufacturer's warranty with operating instructions
Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, tool programming 200 pieces, cone calculation, radius/diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck new 200mm 2 sets of jaws
>> Mulifix size B with 3 steel holders
>> Electronic spindle protection
>> Coolant device
>> Machine feet

About the machine:
A guide is offered. and pull spindle lathe Weiler Commodor in very good condition. The machine is of course fully functional. The spindle runs easily with little crank play. The machine was completely dismantled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. We tested the machine electrically and mechanically. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine under power on site.