Specifications

Type of CNC
Spindle taper
Spindle bore 40 mm
Turning speed 2800 rpm
Tailstock no
Bar feeder no
-------------------
Length x width x height 1830.0 × 1290.0 × 880.0
Weight 1100 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Weiler top lathe model Condor 81 guide and pull spindle lathe with 3-axis digital display from Heidenhain ND780
Geometrically overhauled with acceptance report for tolerances of new machines. 6 month guarantee

>> Center height 165 mm
>> Center width 750 mm
>> Spindle speeds: from 22 to 2800 rpm
>> Spindle passage 40 mm
>> Short taper spindle head DIN 55027 size 5 with bayonet lock
>> Tailstock MK 3
>> Feeds from 0.015 to 0.46 mm /rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.18 to 28 mm
>> Weight approx. 1100 kg
>> Spindle brake can be switched on
>> Length 1.83 m, height 1.29 m, depth 0.88 m

Accessories and equipment:
>> 3 axis digital display from Heidenhain ND780 overhauled
>> Quick-clamping device, collets as good as new from 2 to 30 mm, increasing by 1 mm
>> Three-jaw chuck Röhm 200 mm with 2 sets of jaws As good as new
>> Mulifix size E with 4 steel holders NEW
>> Bed stop
>> electrical Feed protection
>> New LED machine lamp
>> Back wall
>> Operating instructions
>> Coolant device
>> Machine feet

About the machine:
Weiler Condor 81 Leit is offered. and pull spindle lathe in a geometrically overhauled condition, absolutely new. The guides have been newly ground or newly scraped. With acceptance according to test protocol. 6 month guarantee.
A very nice machine with electronic spindle protection. The accessories collets, chucks and Multifix are new or in mint condition. Spindles, spindle nuts, bearings, belts, wipers were replaced. Take advantage of the opportunity to view this machine under power on site and see its condition for yourself.
A protective cover for the lead and pull spindle can be attached for an additional charge.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2008
Offers online 52
Last activity Nov. 27, 2024

Description

Weiler top lathe model Condor 81 guide and pull spindle lathe with 3-axis digital display from Heidenhain ND780
Geometrically overhauled with acceptance report for tolerances of new machines. 6 month guarantee

>> Center height 165 mm
>> Center width 750 mm
>> Spindle speeds: from 22 to 2800 rpm
>> Spindle passage 40 mm
>> Short taper spindle head DIN 55027 size 5 with bayonet lock
>> Tailstock MK 3
>> Feeds from 0.015 to 0.46 mm /rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.18 to 28 mm
>> Weight approx. 1100 kg
>> Spindle brake can be switched on
>> Length 1.83 m, height 1.29 m, depth 0.88 m

Accessories and equipment:
>> 3 axis digital display from Heidenhain ND780 overhauled
>> Quick-clamping device, collets as good as new from 2 to 30 mm, increasing by 1 mm
>> Three-jaw chuck Röhm 200 mm with 2 sets of jaws As good as new
>> Mulifix size E with 4 steel holders NEW
>> Bed stop
>> electrical Feed protection
>> New LED machine lamp
>> Back wall
>> Operating instructions
>> Coolant device
>> Machine feet

About the machine:
Weiler Condor 81 Leit is offered. and pull spindle lathe in a geometrically overhauled condition, absolutely new. The guides have been newly ground or newly scraped. With acceptance according to test protocol. 6 month guarantee.
A very nice machine with electronic spindle protection. The accessories collets, chucks and Multifix are new or in mint condition. Spindles, spindle nuts, bearings, belts, wipers were replaced. Take advantage of the opportunity to view this machine under power on site and see its condition for yourself.
A protective cover for the lead and pull spindle can be attached for an additional charge.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Type of CNC
Spindle taper
Spindle bore 40 mm
Turning speed 2800 rpm
Tailstock no
Bar feeder no
-------------------
Length x width x height 1830.0 × 1290.0 × 880.0
Weight 1100 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2008
Offers online 52
Last activity Nov. 27, 2024

Here is a selection of similar machines

Weiler Condor 81 cnc lathe