Specifications

Cutting height 80 mm
Cutting length 3500 mm
Cutting width 200 mm
Blade diameter 500 mm
Cutting speed 4600 rpm
Engine power 15 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Weinig Dimter Opticut 200 Classic optimizer
- after the technical review
- year of production 2004
- declaration of conformity, DTR
- German production

TECHNICAL PARAMETERS:
min./max. entry length of the element 800/3500 mm
min./max. entry width of the element 80/200 mm
min./max. element input thickness 12/80 mm
type of wood hard / soft
dash cutting
wood classification
max. feed speed 120 m / min
acceleration 5 m / s
saw blade diameter fi 500 mm
saw hole diameter 30 mm
saw spindle speed 4600 U / min
duration of 1 cycle 0.7 - 1.2 sec
a powered conveyor at the entrance and a marking station with side tables for two markers
conveyor belt
total power 15 kW
length measurement - fluorescence camera for 3 qualities
receiving station - conveyor belt
full optimization
total length 8300 mm
stub diameter 80 and 120 mm
OptiCom Direct control
power supply 400 V / 50 Hz

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2015
Offers online 127
Last activity Dec. 23, 2024

Description

Weinig Dimter Opticut 200 Classic optimizer
- after the technical review
- year of production 2004
- declaration of conformity, DTR
- German production

TECHNICAL PARAMETERS:
min./max. entry length of the element 800/3500 mm
min./max. entry width of the element 80/200 mm
min./max. element input thickness 12/80 mm
type of wood hard / soft
dash cutting
wood classification
max. feed speed 120 m / min
acceleration 5 m / s
saw blade diameter fi 500 mm
saw hole diameter 30 mm
saw spindle speed 4600 U / min
duration of 1 cycle 0.7 - 1.2 sec
a powered conveyor at the entrance and a marking station with side tables for two markers
conveyor belt
total power 15 kW
length measurement - fluorescence camera for 3 qualities
receiving station - conveyor belt
full optimization
total length 8300 mm
stub diameter 80 and 120 mm
OptiCom Direct control
power supply 400 V / 50 Hz

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Cutting height 80 mm
Cutting length 3500 mm
Cutting width 200 mm
Blade diameter 500 mm
Cutting speed 4600 rpm
Engine power 15 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2015
Offers online 127
Last activity Dec. 23, 2024

Here is a selection of similar machines

Weinig Dimter Opticut 200 Classic Used cross-cut optimizing saw