Line for parquet 2/3 layers (no click – normal profile) Weinig Verified seller

Description

LINE FOR PARQUET 2/3 LAYERS (NO CLICK – NORMAL PROFILE) composed as following :

PROFILING Machine Brand Weinig special for floor (painting too)

DIMENSIONS OF PIECES mm:
working width min. 60 max 230
working height min. 10 max 50
FEED:
Working speed max 4/30 mt/min
LOADING BELT:
Automatic loading belt with wood marking

MOTOR GROUPS
POS. 1 – 1 Motor group with brush for cleaning of wood
POS. 2 – 1 Horizontal Motor group HP 5,5 with n°2 adjustable for blade for squaring of wood
POS. 3 – 1+1 Tilting motor group HP 3 for smooth.
POS. 4 – 1+1 Vertical motor group HP 5,5 for male and female

DOUBLE GIRDLE OF PULLING:
Double top girdle of pulling adjustable in width with pin support for a secure pulling. Belt of pulling on
the table which are adjustable with upper tracks ideal for already painted woods.

CENTESIMAL ADJUSTMENT:
Centesimal adjustment on all shafts

SOUND PROOF CABIN

CONNECTION TRANSFERT between 1° and 2° macchine

2° TRIMMING MACHINE 3+3 MOTORS

Second machine in line for the transversal processing of parquet, with automatic feeding by
transfer, with elongated lower tracks for the introduction of pieces pushed through pistons.
Useful passage 400 mm.

DIMENSIONS OF PIECES mm:
working width min. 220 max 3200
working height min. 10 max 50

FEEDING:
Speed of feed max 4/30 mt/min

BASE OF MACHINE
Structure with treated and stabilized high resistance base.
Maximum useful working width 3000 mm.

COLUMNS FOR OPERATING GROUPS:
Columns for operating groups right and left for upper and lower truck (girdle), superior supporting table
for pressure.
Sliding column for operating groups on right moving upright on skids in anti-seize material with low
friction coefficient, suitably lubricated automatically by pump oil.
Transverse displacement of the motorized column with metric indicator.
FEEDING SYSTEM:
Feeding group is made with motor variation for working speed from 4 to 24 mt/min.
Driven shaft of chains truck diam. mm 80 with double rectified keys.
INFERIOR CHAIN TRUCKS OF FEED:

MACHINE INPUT DEVICE
Reference lateral guide appropriately rectified to guarantee precise support for the parts to be
introduced. Length 2000 mm.

UPPER PRESSERS

Upper pressure shoulders with belt with clutch. Manual vertical movement with mechanical digital
indicator.

MOTORS

POS. 1 – 1+1 Engrave horizontal inferior Motor Group independent, anti splinter device KW 2 - 6000
rpm.
Diameter of shaft mm 30, useful length mm 60.
POS. 2 – 1+1 Chipping Motor Group independent KW 5,5 - 6000 rpm.
Diameter of shaft mm 40, useful length mm 60.
POS. 3 – 1+1 Milling vertical Motor Group 4,5 - 6000 rpm.
Diameter of shaft mm 40, useful length mm 100.

INCLUDED ACCESSORIES:
Service keys, ground levelling screws and plates, instruction manuals and spare parts, electric schemes
The following are EXCLUDED: ground fixing expansion screws (see technical documentation), tools,
suction pipes.