Specifications

-------------------
Length x width x height 1120.0 × 950.0 × 1600.0
Worked hours
Hours under power
State good
At local norms yes
Status visible

Description

blasting booth
The machine is fully functional, it is a pressure cabin with a cyclone separator with an abrasive reservoir. Air pressure regulation with condensate separator. The machine can be used for surface treatment of metal objects such as forgings and castings, welded parts, parts after heat treatment, pressing and machining. The use of the machine is for cleaning, stripping, derusting or unifying surfaces before further surface treatment or as a final treatment. The machine can also be used on plastics, wood or other materials. E.g. blast the ballotine onto the surface of the glass to achieve a subtle, decorative effect.

Filter - dust extractor with filter cartridge, lighting of the working area, electrically controlled pedal for starting/stopping the jetting process.

Dimensions 1120 x 950 x 1600 mm
Dimensions of the working area 900 x 800 x 500 mm
Power input 230 V / 50 Hz
Cabin lighting 230 V / 13W x 2 – fluorescent
Compressed air Pressure 5-7 kg/cm2, flow rate 0.8 – 1.2 m3/min., dry air
Separator motor 230 V / 50 Hz / 370 W
Separator flow rate 8.5 m3/min
Air filtration - The machine is equipped with a cartridge filter insert.
Cleaning frequency approx. 4 x per hour by manual switch
Table load capacity 50 kg
Total weight 300 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2006
Offers online 109
Last activity Dec. 20, 2024

Description

blasting booth
The machine is fully functional, it is a pressure cabin with a cyclone separator with an abrasive reservoir. Air pressure regulation with condensate separator. The machine can be used for surface treatment of metal objects such as forgings and castings, welded parts, parts after heat treatment, pressing and machining. The use of the machine is for cleaning, stripping, derusting or unifying surfaces before further surface treatment or as a final treatment. The machine can also be used on plastics, wood or other materials. E.g. blast the ballotine onto the surface of the glass to achieve a subtle, decorative effect.

Filter - dust extractor with filter cartridge, lighting of the working area, electrically controlled pedal for starting/stopping the jetting process.

Dimensions 1120 x 950 x 1600 mm
Dimensions of the working area 900 x 800 x 500 mm
Power input 230 V / 50 Hz
Cabin lighting 230 V / 13W x 2 – fluorescent
Compressed air Pressure 5-7 kg/cm2, flow rate 0.8 – 1.2 m3/min., dry air
Separator motor 230 V / 50 Hz / 370 W
Separator flow rate 8.5 m3/min
Air filtration - The machine is equipped with a cartridge filter insert.
Cleaning frequency approx. 4 x per hour by manual switch
Table load capacity 50 kg
Total weight 300 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 1120.0 × 950.0 × 1600.0
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2006
Offers online 109
Last activity Dec. 20, 2024

Here is a selection of similar machines

WISTA DUKE 9080 A Other