Specifications

Metal length 13000 mm
Metal width 2500 mm
Type of source Gas + Plasma
Source model
CNC Yes
Type of CNC Hypertherm EDGE'Pro
-------------------
Length x width x height 14500.0 × 5500.0 × 2000.0
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

The ZAKMET FIRECUT 1325 13000 X 2500 CNC gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system.

Technical data of the plasma cutter ZAKMET FIRECUT 1325 13000 X 2500

- machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm
- maximum table load: 15 kN / m2
- machine supply voltage: 3x400V AC 50 Hz
- central lubrication: Memolub 3.0
- minimum temperature of the working environment: +5 degrees C
- maximum temperature of the working environment: +60 degrees C
- machine dimensions (L x W x H): 14500 x 5500 x 2000 mm

Equipment of the plasma cutter ZAKMET FIRECUT 1325 13000x2500

- CNC control: Hypertherm EdgePro
- ventilated section table: 1550 x 2600 mm
- 9 segments
- gas burner: type MS 3452 \ 250-PM (x2)
- filter ventilation: KAD325-4X4 660 CCD
- plasma aggregate: HPR 260 XD

Technical data for one segment:
- length: 2600 mm
- width: 1550 mm
- height: 575 mm
- number of sections per segment: 3
- section flap closing system: pneumatic controlled from the EdgePro controller
- pneumatic connection: 6 bar + -10%
- air consumption: 460 Nl / h
- the system includes a drainage and lubrication system
- power supply of the machine ZAKMET FIRECUT 1325: 24 VDC

Gas burner with ignition, type MS 3452/250-PM:
- fuel gas: propane, methane
- cutting range: up to 300 mm
- mounting diameter: 45 mm
- handle length: 250 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2010
Offers online 389
Last activity Feb. 1, 2025

Description

The ZAKMET FIRECUT 1325 13000 X 2500 CNC gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system.

Technical data of the plasma cutter ZAKMET FIRECUT 1325 13000 X 2500

- machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm
- maximum table load: 15 kN / m2
- machine supply voltage: 3x400V AC 50 Hz
- central lubrication: Memolub 3.0
- minimum temperature of the working environment: +5 degrees C
- maximum temperature of the working environment: +60 degrees C
- machine dimensions (L x W x H): 14500 x 5500 x 2000 mm

Equipment of the plasma cutter ZAKMET FIRECUT 1325 13000x2500

- CNC control: Hypertherm EdgePro
- ventilated section table: 1550 x 2600 mm
- 9 segments
- gas burner: type MS 3452 \ 250-PM (x2)
- filter ventilation: KAD325-4X4 660 CCD
- plasma aggregate: HPR 260 XD

Technical data for one segment:
- length: 2600 mm
- width: 1550 mm
- height: 575 mm
- number of sections per segment: 3
- section flap closing system: pneumatic controlled from the EdgePro controller
- pneumatic connection: 6 bar + -10%
- air consumption: 460 Nl / h
- the system includes a drainage and lubrication system
- power supply of the machine ZAKMET FIRECUT 1325: 24 VDC

Gas burner with ignition, type MS 3452/250-PM:
- fuel gas: propane, methane
- cutting range: up to 300 mm
- mounting diameter: 45 mm
- handle length: 250 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Metal length 13000 mm
Metal width 2500 mm
Type of source Gas + Plasma
Source model
CNC Yes
Type of CNC Hypertherm EDGE'Pro
-------------------
Length x width x height 14500.0 × 5500.0 × 2000.0
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 389
Last activity Feb. 1, 2025

Here is a selection of similar machines

Zakmet FIRECUT 1325 13000 X 2500 CNC Cutting machine - Plasma / gas