13' X 22' Cms Aquatec 3400 + 3400 5-Axis Twin Table Cnc Waterjet System New 2017 - Cms Aquatec 3400 + 3400

Listing description

STANDARD TECHNI CAL FEATURES *
X Axis stroke4020/ 158Mm (“)
Y Axis strokeTO BE DEFINEDmm(“) Approx 22’
Z Axis stroke530/mm(“)
X axes max feedrate54000mm/ min
Y axes max feedrate54000mm/ min
Z axes max feedrate12600mm/ min
X acceleration2m/ s2
Y acceleration2m/ s2
Z acceleration1m/ s2
XY Worktable area regular table4000 x 2000(157.4 x 78.7)mm(“)
XY Worktable area regular table4000 x 3000(157.4 x 118.1)mm(“)
Loading capacity1000Kg/ m2
Dynamic precision+ / - 0,10mm
Repeatability “ Ps”+ / - 0,025mm
Power13kW
Total Size LxDxH (with light barriers)TO BE DEFINEDmm
WeightTO BE DEFINEDKg
A 5 Axes Head provides 5 axes capability to the machine allowing chamfer and 3D cutting, produces more accurate parts at significantly higher cutting speeds than parts cut with conventional systems.
STANDARD TECHNICAL FEATURES *
B Axis+/- 60°
C Axis+/- 340°
B axes max feedrate17200°/min
C axes max feedrate13400°/min
B acceleration1450°/s2
C acceleration850°/s2
WORKING IN AREA 1 (2) AND LOADING/UNLOADING AREA 2 (1)
The machine allows to stop the photocells in area 2 (1) without interrupting the working operations in area 1 (2) only in the working unit is in area 1 (2), with photocells between the tanks activated.
The safety is granted by the photocells and the area limit switches avoiding the working unit to enter the area 2 (1) for loading/unloading.
Working area n°1 (front side)
X = 4000mm (X=0 right limit - X=-4000 left limit)
Y / V = 3000mm (Y=0 front limit – Y= to be defined rear limit)
Working area n°2 (rear side)
X = 4000mm (X=0 right limit - X=-4000 left limit)
Y / V = 3000mm (Y=3300 front limit – Y= to be defined rear limit)
PRESSURIZED ABRASIVE CONVEYING SYSTEM (330 KG
NUMERICAL CONTROL OSAI OPEN-M
PORTABLE CONTROL UNIT WITH REMOTE COMMANDS UP TO 6 AXES
DREDGE FOR ABRASIVE REMOVAL FROM THE TANK: 1ST DREDGE FOR 3040 TANK AND 2ND DREDGE FOR 3040 TANK
PROGRAMMING SOFTWARE EASYJET 5 AXES
It is a CAD/CAM software package installed in a personal computer working in Windows for the generation of work programs.
QTY (1) DDX PHOTO LICENSE & QTY (2) CAMERA IN ENCLOSURE & QTY (2) CAMERA STANDS
HIGH PRESSURE INTENSIFIER POWER 60 HP – PRESSURE 4130 BAR
JETPOWER EVO TECHNICAL FEATURES
Installed Power60 (45)HP (kW)
Voltage (three-phase)400 ± 5%Volt 50 - 60 Hz
Max water pressure413,7Mpa (60.000 PSI)
Max flow rate5 (1.32)liters/minute (gal/min)
Water consumption from 0 to 5 (1.32)lliters/minute (gal/min)
Max diameter of the orifice0,40millimeters
Oil tank capacity250 (39.6)liters (gal)
Cooling requirements Oil/water heat exchanger*3.2 gal/min water @ max 70ºF *
Dimensions 36" (900) x 59" (1500) x 58" (1560) HInch/millimeters
Weight1350kg

This equipment is located in US