ERSA NWAVE 330 Soldering Machine

Listing description

The Ersa Nwawe 330 is a high-performance machine designed for precision soldering. It has a working width of 330 mm (13") and utilizes a lead-free double wave solder module. The solder volume is approximately 390 kg (860 lb.) for PbSn 64/36 and 335 kg (739 lb.) for lead-free alloy. The machine requires a warm-up time of about 2.5 hours.

The preheating length of the machine is 1,100 mm (43.3"). The flux module is a foam fluxer with a flux storage tank capacity of 10 liters. The machine requires a minimum compressed air pressure of 6 bar (87 PSI) and uses a connecting hose with an inner diameter of 8 mm (0.3").

The Ersa Nwawe 330 has dimensions of 3,620 mm (142.5") in length, 1,040 mm (41") in width, and 1,790 mm (17.5") in height. It weighs approximately 500 kg (1,102 lb.). The machine is painted in RAL 7035 / RAL 7016.

The exhaust stack has a diameter of 150 mm (6"). The exhaust volume is 800 m3/h (28,251.5 ft3/h) for the spray fluxer and 400 m3/h (14,1215.7 ft3/h) for the solder bath, pre-heater, and cooling system.

The machine operates on a 5-wire-system, with a voltage of 3 x 230 / 400 V, N, PE. It has a power tolerance range of +6 %, -10 % and operates at a frequency of 50 or 60 Hz. The nominal rating is a maximum of 55 kW, and the maximum fuse rating is 3 x 80 A (slow blow).

The control system of the Ersa Nwawe 330 is a microprocessor with 99 solder programs. It features a clear text display, parameter monitoring, interval operation, a 7-day time clock, and machine status control.

This equipment is located in PL