SELCO EBTR 120 TWIN PUSHER Automatic Loading Panel Saw

Listing description

Max cutting length : 5600 mm
Max auxiliar pusher course : 4300 mm
Max blade height from table level : 122 mm
Max clamps opening : 110 mm
Lifting table with direct loading : 5600 x 2200 mm
Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm

Main blade motor 18,5 kW / 50Hz (25 Hp)
Incisor blade motor 2,2 kW / 50 Hz (3 Hp)
Brushless motor for blade chariot - Speed 1 -150 m/min
Brushless motor for main pusher – Max speed 100 m/min
2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm)

Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER
Main blade Ø 430 mm
Incisor blade Ø 200 mm

4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line)
4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line)
4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line)
Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands
4 air cushion tables
4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation
Lifting loading table

Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher

The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible
The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option).

Automatic cut panels evacuation
Heavy single structure, Industrial chassis, strong stability

Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade

Pressor group
Lateral alignment group with 2 independent rollers

The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices

When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation

PC Windows XP, 17" screen

With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings

This equipment is located in FR