Vacuum Processing Plant DISHO KORUMA VP 180/3300 for Cosmetic and Food Stuff

Listing description

Vacuum Processing Plant DISHO KORUMA VP 180/3300
for Cosmetic and Food Stuff

measurement and weight:

Total Height: 4500 mm
Height without motor: 3700 mm
Width : 2064 mm
Length : 3040 mm
weight : 4200 kg

I. DRIVES

1. DISHO-main drive:

manufacturer : WINKELMANN
motor number :155343
product :direct current motor
Type :GNFI 132.16 LL/2-GT 7, 45 kW
nominal power :45 kW
speed range :500...3000 min-1
rated current :114 A
protection class :IP 23
construction :B3/B5
engine controller :LABOD
Type :GN 3 DZM-380/440 – 150-vDB

2. AGITATOR DRIVE:

manufacturer :SEW-EURODRIVE
motor number :010682178.1.07.03002
product :variable speed geared motor with vario motor
Type :KAF96 D44EF/DA DV132ML4
nominal power :9 kW
rated speed ;8…40 min-1
rated current :18,5 A
voltage :3x380 V
frequency :50 Hz
protection class :IP 54
adjusting motor :GROSCHOPP Nr. 376011

3. VACUUM PUMP:

manufacturer :SIHI
product :liquid ring vacuum pump
with flanged motor
Type :LEMA 250 AZ AAE 0A.0/LU.7
nominal power :5,5 kW
rated speed :1450 min-1
rated current :11,5 A
voltage :3x380 V
frequency :50 Hz
protection class :IP 44
motor construction :IM B35

I. DISPERSION -AND HOMOGENIZER UNIT

nominal size :ø 180 mm
speed range :500…3000 min-1
rotor- circumferential speed :4,7…28,3 m/s
material quality :1.4571 (V4A – AISI 316)
nain seal :GLRD, einfachwirkend
secondary seals :aseptisch
sealing quality :EPDM
mixing vane :standard, aseptisch
conveyor vane ;standard, aseptisch
dispersion disc :standard
suck vane :standard, aseptisch
rotor :G30x4 mm
stator :G30x4 mm
pump vane :standard, aseptisch
taper flange connection :DN 140
recirculation line. :DN 80
infeed, left :1x DN 50, el.pneum.
infeed, right :1x DN 50, el.pneum.
ground outlet :DN 80, el.pneum.
waste outlet :DN 25, handbetätigt

II. WORK VESSEL

manufacturer :HELLMICH
number :3777
material :1.4571/1.4301
content :3300 l
capacity :2500 l
minimum working volume :500 L
maximum temperature :180 °C
minimum working pressure :-1,0 bar
maximum operating pressure :+2,5 bar
double shell construction :in two parts
max. operating pressure in double shell. :+ 6,0 bar
max. temperature in double shell :180 °C
thickness of insulation material :30 mm

III. VESSEL LID

closure :screwed tightly
manhole :PORTEX
manhole -size :407x425
manhole-type :2229225 Inox 316 L P
sight glass-manufacturer :MAX MÜLLER
sight glass -size :DN 125
sight glass-design :1x with wipper and lamp
1x with wipper in manhole
safety valve :1x nozzle DN 25
vacuum suction line :1x nozzle DN 25
vakuum pick up :1x nozzle DN 25
product inlet :1x nozzle DN 65
CIP-connections :4x nozzle DN 65
CIP-barrier :el.-pneumatical
tank cleaning heads :LECHLER U40 567.279.16

IV. AGITATOR

type :with baffles
direction of rotation :reversibel
mixing blades :flat 100x15
character skew :60°
internal sealing :GLRD MSS-70
rotation speed :8…40 min-1

V. RECURCULATION LINE

nominal width :DN 80 ^
valve :combination DN 80, el.-pneum.
sampling :DN 25, manually operated

VI. VACUUM SUCTION LINE
nominal width :DN 25
vacuum separator :glass cylinder 0 125 mm
venting valve :with teflon sterile filter
VII. ENERGY SUPPLY, ELECTRICITY
rated connection :61 kW
rated operation :132 A
max. fuse link :200 A
feed in :3/NPE, 50 Hz
VIII. ENERGY SUPPLY, WATER
vacuum pump,inflow :3/4", 0,6...1,2 m3/h
vacuum pump, outlet :2“
CIP :DIN11851-DN40, 14m3/h

IX. ENERGY SUPPLY , AIR
connection :1/2"
nominal pressure :6 bar
quantity :program-dependent

X. ENERGY SUPPLY, double shell
steam inflow : flange DIN 2633-DN 50
condensate outlet :DN 25
water inflow :flange DIN 2633-DN 50
water backflow :DN 50
air connection :DN 15

Manual Instructions available

This equipment is located in DE