Showing 201 - 216 out of 216
Year:
Used 20 HP Mikro Pulverizer hammer mill. Model 2DH. 20HP 230/460V motor. 6900 RPM. Screw conveyor.Year:
Used 40 HP Jeffery Hammermill. Size 30 AB. 40 HP Motor 230-460/60/3. Base mounted.Year:
Used 100HP Granulator. Manufactured by Netzsch-Condux. Model CS-650/800. Throat 22.5" x 32.5". (5) knife rotor.Year:
Used 5HP Wet Circulation Attritor Mill. Manufactured by Union Process. Model Q-2. 5HP Variable Speed Drive motor. Anchor and high-speed stirrer. 2.6 gallon grinding tank capacity. 3.5GPM. serial #120704. Built 2012. Past used at R & D facility. Dimensions 44" x 49" x 82". Weight 1500 lb.Year:
Used 5HP Charlotte model SD2 colloid mill. On base.Year:
Used Andritz Sprout-Bauer Model DSF1518 granulator, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film granulationYear:
Used Precision Air Conveyance Corp. Model 78FSP inline film chopper. Equipped with 2 knife open rotor, 1 bed knife, 4″ diameter inlet and outlet. 1 HP, 115/230/460 volt, 1725 rpm motor. Includes inlet muffler box and disconnect switch. Mounted on caster plate base.Year:
Used Hydreclaim small parts Granulator. Model 1218 CTE.. Has 12″ X 18″ throat opening with sound enclosed top and side feed hopper. Has 2 knife slant cut open rotor with approx 1/2″ screen. Tray feed height 52″ from floor. Driven by a 25 HP 460 volt motor. Includes blower discharge.Year:
Used APTM Superjet Micronizer Jet Mill. Model SM1-C3. Advanced Powder and Micronisation.Year: 2021
1 Unused Cadmach Stainless Steel Granulating Mill. The machine was manufactured in 2021 and is constructed of stainless steel. Equipped with a 12” diameter 3 blade impeller, product infeed and discharge, integrated controls with start/stop, adjustable speed, rpm counter and emergency stop. Output rated at up to 1,400 pounds per hour. Sits on castors. Electrics: 2 HP, 3/60/480 volts.Year: 2008
1 Used Kemutec Sieve/Cone Mill Combination Unit. Manufactured in 2008 and is designed to both sieve/sift and mill product to the desired particle size. The cone mill is fitted to the sifter oversize outlet. Oversize product that passes through the sifter is then milled in the cone mill. The sifter fines outlet and the cone mill outlet both feed into …Year:
1 Unused Corenco Stainless Steel Disintegrator/Hammermil. Comes with a long infeed with an 8” rotor diameter, sharp and blunt knives, reversable knife assembly. The unit sits on an open stainless steel tubular frame and sits on castors. Equipped with a 5 HP, 3/60/460-volt drive, Lenze SMVector AC frequency inverter. Can do both dry and wet milling.Year:
250 ml horizontal bead mill. It has a .012 screen. Utilizes a Randolf EconII peristaltic pump. Last used for R&D in a cosmetics facility. Manual and drawings are available.