Listings similar to "SUMITOMO SE50S" 60

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Tie Bar Distance :630×630mm Screw Diameter :60mm Theoretical injection capacity : 679㎝3 Injection mass :624g Maximum injection pressure: 150Mpa …

Tie Bar Distance :860×860mm Screw Diameter :80mm Theoretical injection capacity : 1880㎝3 Injection mass (polystyrene) :173g (polyethylene) : 137…

Tie Bar Distance :410×410mm Screw Diameter :40mm Theoretical injection capacity : 176㎝3 Injection mass :160g Maximum injection pressure: 157Mpa …

manufactured year : 2005 screw diameter : 28mm status : in stock delivery time : Immediate injection capacity : 90cm3 Max injection speed : 300m…

Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 50 Screw Diameter (mm): 32 Max Shot Weight (PS) (g): 86 Control System: Procan…

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Mould opening/closing, injection, ejection, etc. are fine and smooth. There is backflow as a problem. It is not known whether it is possible to r…

Model: FT 130 / F2 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 x 400 Clamp (ton): 130 Year: 2007 PLC Model/ Controller: ZHEIJIANG (ORIGINAL)…

Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

manufactured year : 2005 screw diameter : 28mm status : in stock delivery time : Immediate injection capacity : 90cm3 Max injection speed : 300m…

Injection Unit C110 Screw Diameter 25 mm Shot Size 1.7 oz Max Injection Pressure 30,780 Tie Bar Spacing 14.17" x 16.14" Mold Open Stro…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

Made in: 2010 Characteristic: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cm³ Distance between the columns (horizo…

Model: FT 110 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 X 340 Clamp (ton): 110 Year: 1996 Shot Weight (gram): NA PLC Model/ Controller: P…

Horizontal Injection Mold (81028) Manufactured 2011 Specifications Features Shot Size: 8.7 oz. Tie Bar Spacing: 22.05" x 20.08" Platen Size: …

Horizontal Injection Mold (81029) Manufactured 2006 Specifications Features Shot Size: 30.2 oz Tie Bar Spacing: 26.97" x 25" Platen Size: 37.…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Engel Victory 750/150 Tech Injection weight: 354 g Closing force: 1,500 kN Screw diameter: 50 mm Injection pressure: 1427 (1909) bar Column spac…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

Type: KM 300-1400 C1 Producer: Krauss Maffei Made in: 2001 Characteristic: Hours on: 70.000 h Clamping force: 300 t Screw diameter: 60 mm I…

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…