Preowned industrial measuring units 192

COORD EOS 5/4/4 Measuring unit

Year: 2000

The manual CMM 3D gauge is in good technical condition. Measuring range: X axis 400 mm Y axis 500 mm Z axis 400 mm Sensing head: TPC3, R76398 Measuring probe: Renishaw Maximum permissible indication error: MPEe = 6.0 μm + (L/330.0 mm) μm Software: 1. Metrolog X4 V4 GA HF2 (USB key) 2. Possibility of importing CAD models, reporting 3. …

Mistral DEA 100707 Measuring unit

Year:

5-axis measuring machine - MISTRAL DEA 100707 New software (loading and analysis of 3D models) - PC-DMIS Measuring range (mm): X 1.000 - Y 660 - Z 660 Accuracy (micron, L in mm): 4.5 + 5 * L / 1000 (18 - 22 ° C) the machine has run very little (about 15 hours in the last 10 years).

Wireless Laser Tracker OmniTrac 2-50

Year: 2018

Specifications Type: 2-50 Producer: OmniTrac Made in: 2018 Characteristic: Software: Touch DMIS Linear Range (diameter): 50 (100) m Minimum Measurement Distance: 0 m Machine height: 430 mm Machine length: 198 mm Machine width: 198 mm Machine weight: 10.9 kg

DEA GLOBAL S 07.05.05 Measuring unit

Year: 2004

The CMM DEA GLOBAL S 07.05.05 measuring machine, built in 2004 in Italy, is used for quick and very accurate measurement of details with complex shapes. Component measurements are made using the contact or non-contact method, which are then presented as a set of point coordinates. The DEA GLOBAL Status 07.05.05 coordinate measuring machine is equipped with an indexed RENISHAW …

PERTHEN Perthometer S6P Measuring unit

Year:

checking height: ca. 600 mm voltage: 220V / 80VA machine weight approx.: auf Anfrage kg dimension machine approx.LxWxH: Messständer: 0,75x0,45x1,04 m dimensions L x W x H: Messwertaufnehmer: 0,32x0,51x0,23 m additional information Control unit module TPX Base plate/granite plate with T-slot: Size=L:650 x W:450 x H: 80mm Travelling beam travel Z = 600mm, by hand knob, and swivel 45° Measuring …

Coordinate measuring machine FARO Edge

Year: 2015

Faro Edge measuring arm with soft and hard case, electric cables, calibration kit, table mount, some replacement tips. It is equipped with metrology tripod and PC with SpatialAnalyzer software. Everything is in excellent condition, under power and calibrated in 2020 in Germany (distributor) and almost not used after it.

DEA SCIROCCO 151310 Measuring unit

Year: 1997

1997 DEA SCIROCCO 151310 measuring device DEA SCIROCCO

COXO C-SAILOR-PRO

Year:

C-SAILOR implantology motor + Multifunctional control pedal + 20:1 implantology contra-angle with optical fiber Product never used

DEA Mistral 070707 Measuring unit

Year: 2014

Measuring range: X 700, Y 1000, Z 700 [mm] Measurement uncertainty: 1.7 + 3L/1000, 1.9 [µm] 3D displacement speed: 500 mm/s 3D acceleration: 2500 mm/s²

MORA 0151.12.14.30 3D measuring unit

Year: 2002

Three-dimension measuring unit X stroke: 2410 mm Y stroke: 1400 mm Z stroke: 1200 mm Year: 2002 Last calibration date: 2022 Equipped with: Automatic axes (X,Y,Z) Probe: Renishaw PH10M Several tools

MITUTOYO Euro-Apex 574 Measuring unit

Year:

A highly accurate CNC Coordinate Measuring Machine that allows you to achieve exact results at lightning speed. The STRATO-APEX Series has the following advantages: - High accuracy measurement and high travel speed - High-performance scanning. - Ultra-high accuracy rulers on each axis. - An anti-vibration system reduces the impact of nearby vibration sources. Range: 500x700x400mm Accuracy: E0, MPE from- (0,7+0,25L/100) …

OMIG 620 -4H-Jena Measuring unit

Year: 2010

Measuring device OMIG 620 -4H-Jena Year of construction: 2010 Type/manufacturer: Omig 620/4H Jena, conversion to measuring table 650 Test field / with optics for ground sections: 620 x 480 mm in X, Y and Z CCD camera : HITACHI KP-D20/optical zoom with joystick LED front light/coaxial front light, Optical reproduction of micrographs: measure and save micrographs Dimensions / weight: cabinet: …

Dea Scirocco 151310 Measuring unit

Year: 1997

The DEA SCIROCCO 151310 measuring machine was manufactured in 1997 in Italy. The Coordinate Measuring Machine performs contact or non-contact measurements of details, which are presented as a set of point coordinates. The use of such advanced technology enables quick and very accurate measurement of elements with complex shapes. The measuring device performs the process of measuring details in three …

METRIOS MT7575 Measuring unit

Year: 2017

Manufacturer: METRIOS Model: MT7575 Used measuring unit Year of manufacture: 2017 Weight: 105 kg

SHIN NIPPON KOKI MM 2500-5012 Measuring unit

Year: 2009

This 3-axis measuring machine was manufactured in 2009. The SHIN NIPPON KOKI MM 2500-5012 offers expansive dimensions and capabilities, with an effective distance between columns of 3500mm and axis movements of 5000mm on the x-axis, 2500mm on the y-axis, and 1200mm on the z-axis. It features a maximum feed rate of 10,000 mm/min, supported by AC servo motors, ensuring precise …

Mitutoyo BHN 710 CMM

Year: 2000

Mitutoyo BHN 710 CMM 700X1000X600 mm Renishaw cnc automatic turning head and probe MCOSMOS V2,4 software

Aberlink Axiom Too 900 Measuring unit

Year: 2016

Machine is in operational condition. Last calibration done in 2022 with certification. Has been in storage since. Please ask for further details.

FaroArm Fusion Measuring arm

Year: 2017

FaroArm Fusion Measuring arm Length : 2400 mm Number of axis : 6 FaroArm Fusion Bluetooth Standard Probe kit (3mm & 6mm) CAM2 Measure 10 - Probing version software Machine is in excellent condition

Coord 3 ARES NT 1075 MOT Measuring unit

Year: 2016

Measuring machine in excellent condition, gantry structure. Complete with Renishaw Nikon 3D scanner for reverse engineering. Condition Used x-axis (strokes) 1000 mm y-axis (strokes) 750 mm

Talyrond 3 T Roundness Gauge Measuring unit

Year: 1996

Talyrond 3 T Roundness Gauge Measurement Code 155/30091, UK Manufacture 05-96. woth rear mounted station 155/10873, with tbale , computer, manuals, accessoires & disks.