Preowned industrial equipment 573

NETZSCH ROLLER LINE for shaping ceramic plates Low working hours

Year: 2005

NMTEH sia Carpet washing machine

Year: 2024

ACS Climate Chamber WZH40 B2 XL Low working hours

Year: 2017

ACS Climate chamber Volume: 40 cubicmeter Temp Range: -70° to +80°C Temperature up: 2,1°C per minute Temperature down: -1°C per minute Humidity: 5-95% Rated power: 44kWt SW: myKratos Web Based. Run time is estimated to: 1200 hours Our price do not include: Decommisioning, transport and commisioning. We have an estimated price from Norwefian company for this to be 30 000 …

Tribopress Complete line for brick/paving stones production Low working hours

Year: 2017

Industrial, reliable, Spanish installation for the production of paving stones and facing bricks. It was in active operation for two years with breaks, from 2017 to 2019, according to the counter, only a little more than 1,000,000 bricks were produced, as our plant has two lines of similar TRIBOPRESS equipment, producing facing bricks and paving stones using the hyper-pressing method, …

NETZSCH ROLLER LINE for shaping ceramic plates

Year: 2005

Paper Honeycomb Panel Production Line San (Qingdao)

Year: 2011

Paper Honeycomb Panel Production Line San (Qingdao) International Trade Co., Ltd, China A complete production line that is used to produce paper honeycomb panels. This is technically simple and efficient production line. The machine has a working width of 1300mm and a working speed of up to 12 m/min. There is a printing section included that marks the products (for …

TORO Groundmaser 4700 D Grass cutter

Year: 2015

Honeycomb Core Production Line YALIAN INDUSTRIAL 1600 mm

Year: 2013

Honeycomb Core Production Line YALIAN INDUSTRIAL CO., LTD, China A complete production line that is used to produce paper honeycomb core. This technically simple machine is in good working condition and requires little maintenance to keep it running. The machine has 2 sets of glueing reels that are meant for 14mm and 21mm cell size. 2 workers are needed to …

SOMERO S-240 Laser Screed - laser screed machine

Year: 1998

Laser screed machine SOMERO S-240 Laser Screed - laser screed machine 1998

Filtrapol concrete production line

Year: 2019

Sell sulfur concrete production line Sulfur concrete machine Sulfur concrete production line after testing for sale as a whole or for parts 1) 2 aggregate fractions dosed by weight with metering conveyors (inverters); 2) Aggregate heated to a temperature of about 170oC in a drum dryer; 3) Share of binder (sulfur): approx. 16% in liquid state dosage by weight; 4) …

Enceko Dryer Low working hours

Year: 2015

Two-section mobile bale dryer Two-section mobile dryer from 2015, consisting of: - 2 NPO-350 air heaters + ST-3 steel frame - Riello two-stage oil burner - Oil tank 5m3 - Fan industries-Venture MBB-4-1000/355-3000700T - drying collectors 3 modules, each with 4 drying stations

HORPRE NOVA 51 Mobile vibro press

Year: 2011

The machine is standing in its entirety, to start it you need to connect to the power supply. Technical condition to be verified, the machine stands unused for a long time but has not had any breakdown. Mobile fully automated vibropress Horpre NOVA 51. The machine is used to produce blocks, hollow blocks and other concrete elements. Year of production …

Enercon E-70

Year: 2004

I have an Enercon E 70 wind farm for sale. Rated power: 2 MW, height - 100 m. The windmill is dismantled and stored in a suitable warehouse.

GEA 60-01-937

Year: 2007

Installation for separating light and coarse fractions in the field of petroleum products, the installation is composed of OSD 60-01-937 separator with a capacity of 7m3/h, horizontal decanter UCA 458 with a capacity of 30m2/h and electrical cabinet for the installation. The installation also works on single mode, controlled from the electric cabinet.

Used Steinbach Errani UL-300 labeling machine

Year: 2022

UL-300 is ideal for marking cans, bottles and other cylindrical packaging in small to medium-sized quantities. This tireless workhorse is easy to use, compact, requires minimal maintenance and is very easy to operate. With the hot glue version, there is no need to even clean the glue container after use. Simply insert a stack of labels, adjust the can stops …

AJK Mechanik type 1250/0,9 Turning machine for rolls of three-ply cardboard and paper Hot deal

Year: 2021

Turning machine for rolls of three-ply cardboard and paper Hydraulic turning machine for rolls of three-ply cardboard and as well as solid cardboard. Equipment used in full working order. The machine was manufactured by AJK Mechanik.

3-PLY MASK MANUFACTURING MACHINE

Year: 2021

3-PLY MASK MANUFACTURING MACHINE 1 SET EAR LOOP MACHINE - 10 HEAD 2 SETS

Automatic baler Autefa Liftbox Compact 1500 + ADW

Year: 2011

Automatic baler Autefa Liftbox Compact 1500 + ADW The baler automatically applies strapping and wraps with film

Almost new Chiesa SANSON F1 BABY EDI CE Mod L automatic cutting press

Year: 2021

CHIESA's CNC high speed high precision traveling head die cutting press fully driven by AC servo-motors with jumbo rolls stand 8 places and waste rewinder including full set of cutting dies for producing abrasive discs and stripes and industrial suction system. Main futures: 1. Power – 25 t 2. Guarantee working speed (150 mm) – 57 strokes/min 3. Useful working …

Trotec speedy Speedy 360 flex

Year: 2019

Trotec Speedy 360 Flexx is a versatile machine capable of cutting wood, plastic, leather, textiles, paper and acrylic, as well as engraving glass, metal (thickness < 0.5 mm) and stone. It is equipped with a self-contained extractor that eliminates odors and dust. The machine is supplied with lenses suitable for CO2, fiber or combination lasers. Dimensions are 1221 x 830 …