Showing 221 - 239 out of 239
Year: 1997
Used Microfluidics M210A Microfluidizer High Shear High Pressure Liquid Mixer. 316 S/S Contact Parts, Nominal Flow rate of 1 to 1.5 GPM. Operating pressures 2,500 to 12,000 PSI, 15 HP Hazardous Location Rated Motor, Mounted on (4) casters. 3/230/460/60. Built 1997.Year:
One used Ross HSM-400DLA 1 h.p. Homogenizer, 230/460/60/3Year: 2020
Used 20HP Admix Boston Shearmill. Manufactured by Admix Boston. Model BSM 25-3. 20 HP motor. Built 2020.Year:
One used Reimers Electra Electric Steam Boiler Model RH-20. Max Working 100 PSIYear:
Brand Reliance Model RU100 Year of Mfg 2013 Voltage 460 Volt 3 Phase 60 Hz Capacity 100 Liters Operating Capacity 80 Liters Batch Size 90 lbs. (Varies with Bulk Density)Year:
Double jacketed | No |
---|---|
Motor Power | 6.4 kW |
Homogenizer | Yes |
---|
Year:
Used 60 HP IKA Model MHD 2000/30 Mixing-Homogenizing-Dispersing System. Total capacity 90 gallons per minute. Maximum solids capacity 6,200 l/h. Tip speed 23 m/s. Rotor rotational speed 1500rpm. Driven by approximate 60hp, 3/60/230/460 volt motor. Top 6" inlet, Side 3" liquid inlet. 4" Outlet. Mounted on base.Year:
1-Used Sonic High Shear Colloid Mill. Used briefly in the food industry, machine appears to be in excellent condition and is equipped with feed pump. Mounted on stainless steel stand.Year:
SPX Homogenizer Model G37-3.0B Max Pressure 206 Bar, Brand New Still In The Crate! Offsite Item!Year:
Used 1056GPH Rannie Homogenizer, Model BT, Type 40.120H. Capacity 1056.688 gph (4,000 l/h). Maximum homogenizing pressure 1,000 bar (14,503 psi). 3/60/460 Volt.Year:
USED APV GAULIN MODEL G90-1.5P, S.S. CLAD HOMOGENIZER. 1500 PSI POPPET VALVE CYLINDER. MICRO GAP VALVE ASSEMBLY. 100 MM PLUNGER DIA. 125 HP MOTOR, 460 VOLT ONLY. CURRENTLY SET TO RUN 7,345 GPH.Year:
APV GAULIN MODEL G90-1.5P. S.S. CLAD HOMOGENIZER. 1500 PSI POPPET VALVE CYLINDER, MICRO GAP VALVE ASSEMBLY. 100 MM PLUNGER DIA. 125 HP MOTOR, 460 VOLT. (CURRENTLY SET TO RUN 7,345 GPH).Year: 2008
1 Used Zetterstroms 20 Litre Stainless Steel Jacketed Pressure Vessel. Unit was manufactured in 2008. All contact parts constructed in 316 stainless steel, base and frame in 304 stainless steel. Jacket: MAWP: 50 psig at 302°F/100 psig at 302°F. MAEWP: 14.5 psig at 302°F. MDMT: 32°F at 50 psig/32°F at 100 psig. Chamber diameter: 13-3/4” x 19” deep. Comes with …Year:
SilversonHigh Shear MixerModel 275 UHLS Silverson High Shear In-Line mixers are supremely efficient and rapid in operation and are capable of reducing mixing times by up to 90%. The action of any Silverson In-Line mixer can be modified with the use of rapidly interchangeable workheads. This enables any machine to mix, emulsify, homogenize, solubilize, suspend, disperse and disintegrate solids. Electrical …