Used wood chippers for professionals on sale 69

Used 2000 Strapping machine Sigma Pack JX-1

Year: 2000

Strapping machine - Manufacturer: Sigma Pack - Model: JX-1 - Year: 2000

Almab dray sorting line / tray sorting

Year: 2003

Try sorting with 6 pockets Speed: 15 layers per minute OptiGrader Edger - a value optimizing system for board edgers infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms cassettes outfeed conveyor

IWT V10-S Impregnation Plant

Year:

Pressure vessel Diameter 1 .400 mm Length 4.100 mm Volume: 24.000 litres of preservative Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Wood pack size: max 1 ,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float sy stem …

Used Stingl

Year: 2000

length 7m, 6 pulling chains, like new condition!; like new

2023 Fortes - Wood gasification technology 140 kWel

Year: 2023

Wood gasification technology that converts biomass (wood chips) into wood gas. The obtained wood gas is used in the production of electricity and heat. Gasifiers are reaching electrical efficiency up to 30% and with fuel utilisation rate up to 90%. The capacity of one unit is up to 140 kWel and heat up to 300 kWth. System is modular and …

Used Band-A-Matic F-20 Used mobile strapping machine

Year:

Other Woodworking Machinery Used mobile automatic strapping machine: - manufacturer Band-A-Matic, - model F20, 220 volts, - mobile on 4 wheels, - dimensions (LxWxH) 900mm x 600mm x 750mm, - 2pcs available.

Used Vecoplan Conveyor

Year: 2006

1 piece scraper chain conveyor 650/500 mm (W/D) length 38 m; Good

Used Jumper RGFO Conveyor belt

Year: 2011

1. Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, manual clamping station, drive approx. 11 kW, with scraper, 2 level monitors, up and transfer hopper BJ 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW

Used Valon Kone VK32S Debarker

Year:

Used EWD H38

Year: 1995

Remote-controlled gate loading system H38 For block-abutting gate cutting at high feed rates. The gate operator sits in a stationary control station with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with a new control if desired!

Brother YM-250 BM Wood chipping machine

Year: 2019

20” Powermatic Bandsaw Model #81 230v 2HP 3Phase USA made 24”x24” mitering table

Year: 1985

**For Sale: Powermatic Bandsaw Model #81** - **Manufacturer:** Powermatic - **Model:** 81 - **Year of Manufacture:** 1985 - **Technical Condition:** Good - **Power Supply:** 230V, 3 Phase - **Motor Power:** 2 HP - **Table Size:** 24” x 24” - **Features:** Mitering table - **Origin:** USA made This Powermatic Bandsaw is a reliable and robust machine, ideal for various woodworking applications. …

Used Walfridson AB, Hydraulic station

Year:

Other Woodworking Machinery Hydraulic station is in working condition. Kw: ['30', '7,5', '7,5', '0,55', '4'] Electric Motor For Oil Cooler: 0,75

Used INAB Hydraulic station

Year:

Hydraulic station is in working condition. Electric Motor: ['11 kW', '7,5 kW', '18,5 kW'] Electric Motor For Oil Cooler: 0,45 kW

Used RUDNICK+ENNERS KF 125/60/2 x 16000 charging systems

Year: 1998

R&E conveyor Bj 1998 width 2x 650 length 16 m curved, conveyor height approx. 6 m good condition!

Used Balz VSR

Year:

Super condition! New control installed in 2020, available immediately! Technical data: - Absolutely jerk-free mobility on four axes - FU or servo-controlled - State-of-the-art control technology - Turning of the transported goods without a stop - Fast work cycles - Low installation height The control is carried out by radio and has the following functions: - Up and down - …

Morbark 30RXL Wood chipping machine

Year: 2002

The chipper is in perfect condition, it was concluded the service agreement with Ukrainian office of Caterpillar.

Bacci Tsg2T Round End Tenoner

Year: 2020

Features: Tenoning machine to execute tenons Continuous revolution movement of the cutter around work piece Standard anti-splintering device Adjustments of thickness, length, and tenon inclination can be done eiht the machine by movement through external wheels Table feed with hydraulic adjustment to avoid "stick-slip" Support square for piece rotating around a fixed point Possibility to cut off, adjusting thickness to …

Precision 66" Wood chipping machine

Year:

For sale: Precision 66" 6 Knife Precision Chipper - Manufacturer: Precision - Model: 66" - Technical Condition: Good - Additional Information: This 6 Knife Precision Chipper is in good working condition and ready to boost your wood chipping processes. Perfect for industrial use. Reach out for more details.

Scm F410 N Jointer

Year:

8 HP motor 16-1/8" wide working capacity 102-1/2" long table with ribbed cast iron 5/16" maximum depth of cut Parallelogram movement of the infeed and outfeed tables 4-knife straight knife cutterhead 4-3/4" diameter cutterhead rotating at 5,000 RPM 57" infeed table length 45-1/2" outfeed table length 47-1/4" x 7-1/2" aluminum jointer fence Fence tilts 0 to 45 degrees Spring type …