Showing 61 - 74 out of 74
Year:
STORK PLATE HEAT EXCHANGER Designed for heating and cooling the product, as well as for milk sterilization. Manufacturer: STORK Serial no.: pg.8.3.230 1525 Output: 7,500 litres/h Inlet and outlet diameter: 90mm Overall dimensions: length 620mm, width 330mm, height 1,020mmYear: 2016
Tunnel pasteurizer fully dressed available immediately. Commissioned and run production for Approx. 55hrs. Complete turn key set up. Requires Boiler for heat connection to Manifolds. 12m long (2x 6m sections) 2m wide (fully dressed 3m) 2m high Throughput:12,000 BPH Steam requirement: 540 kg/hr steam. Pre heat Zone: Direct steam injection to lower baths. Retention Zones Heating: Direct steam injection to …Year: 1990
Glatt "Uni-Glatt’ lab size, stainless steel, fluid bed dryer capable of drying, mixing and coating tablets, hard or soft gel capsules, metal beads and seeds from .5 to 3.0 kg. with production rates per hour – depending on materials and application. System can dry conventional granules, powders and crystalline substances. Fluidbed drier Capacity: 0.1 - 3.0 KG Electric heating: 4 …Year: 1997
Category:Heat Exchangers, Processing Equipment, Shell and Tube Manufacturer:WAUKESHA Year:1997Year: 2003
DSI 2 Tank Mineral Injection Skid with 2 vertical stainless steel 300 gallon tanks with top agitators, top manway doors, common stainless steel frame, (3) Fristam 15HP Pumps – Model FPX 3542, (6) Automatic Air Controlled Valves, (2) AGC Proflow Series Plate and Frame Heat Exchangers (Model 300-1, Year 2002), (3) MicroMotion Meters with Digital Readout Displays, 3 Stainless Steel …Year: 2007
007 Tranter Super Changer GXD Series Plate Heat Exchanger, Model No.GXD-091-H-5-NP-340, Mfg. 2007, Surface Area 3,251.99, MAWP 100PSI @ 284*F. Approx. 6,900 LBSYear:
Alfa - Laval P14-RB Stainless Steel Heat ExchangerYear: 1993
TBM- Thermotech (Fristam) Tube In Shell Heat Exchanger, Model: 5-1204GG.75.6.9, Mfg. 1993, 80 PSI rated, Type 316 Stainless Steel, with 1 1/2 " Tri-Clamp product in/out, 3" Tri -Clamp Media in /out, and a stainless steel support standYear:
This Thermo / Neslab Steelhead Water-to-Water Heat Exchangers is new from surplus stock. This unit is similar to the Steelhead 1. The information from this unit's tag is listed below. Configuration from Manufacturer's Sticker: • Input Voltage: 200-208V (3phase+ground) • Rated Current: 23/25A • Heater: 6kW at 208V • Main Breaker: 30AYear:
Description APV Stainless Steel Plate Heat Exchanger Type SR35SH, with (109) Stainless steel plates, mounted on stainless steel frame.Year:
Lightly used Hobart/ Vulcan APB Roll-In 4 Rack Proofer. Serviced and tested. Unit was in service till we removed it in one piece. Complete unit. Power: 220V/ 20A/ 60 Hz Capacity: 4 Full sheet bakery racks Features: Adjustable Temp. Control Water line connection. Interior lights.