Bdm Bundler Wrapper Cellophane Overwrapp

Year:

Cellophane overwrapper/bundler by bdm s. R. L. (bologna, italy) (division of prb packaging). Fully automatic overwrapper with bundling capibility for up to 75 ppm, individual sizes from 15 to 250 mm wide x 10 to 60 mm high x 50 to 210 mm long, maximum bundle size 50 to 250 mm wide x 20 to 150 mm high x 50 …

Used Bosch Doboy B 500M

Year:

Sig-doboy continious pharmaceutical grade bag sealer, model b 500 m. Features all stainless steel sealer, air operated sealing pressure with pressure regulator, two zone heating with independant controls, direct contact ink coder (some parts req), variable speed with controller, e stop, hinged full service cover with safety interlock and acrylic see through front window over lenth of transport, total transport …

Bossar B-2500 Horizontal Form, Fill, Seal Machine, Mfd 2000

Year: 2000

1-Used bossar model b-2500/stu-s all stainless steel horizontal form, fill and seal machine. Capable of producing 3-sided bag, maximum dimensions 250mm wide by 270mm deep, and minimum size 100mm wide by 100mm deep. Last running polyethylene bags at approx. 60 bags per minute, machine is also suited for laminate film. Manufactured in 2000, machine is complete with three filling positions …

Used Ilapak Vt-400 Sp Vertical Bagging Machine, No Scales

Year: 1994

1-USED ILAPAK MODEL VT-400 SP VERTICAL BAGGING MACHINE, . MANUFACTURED IN 1994, MACHINE HAS IMPULSE AND RESISTANCE SEALING SYSTEMS. LAST USED FOR THE PACKAGING OF FROZEN PASTA IN POLY BAGS. WITH 400MM VERTICAL/HORIZONTAL SEAL MACHINE CAN BE SUPPLIED WITH FORMING TUBES FOR 6.75″, 7.00″, 7.75″, AND 9.125″ BAGS. ELECTRICAL SPECIFICATIONS 3 PHASE 60 CYCLE 230 VOLT.

Excel Packaging Systems Inc. M320

Year: 2014

Excel Packaging Systems, Inc. Vertical Form Fill & Seal Bagger. MFG. 2014, Model M320, 220 Volt, Weight 410 KG. Last used in 2019 For Granola Products. With Linear Weigher/Scale. Model UW 4-L, Mfg. 2014

Used Combi Ergopack Erector-Packer-Sealer System

Year: 2009

Mfg: Combi Packaging Model: Ergopack System . 1CE (case erector) & TB1 (case sealer) Electrical: 480V / 3ph / 60Hz Controls: AB MicroLogix 1200 (integrated controls for whole system) Closure: 3M Accuglide 2″ tape heads (top & bottom) Age: 2009 Condition: Used Footprint: Approx. 12′ L x 7′ W (erector / pack station) . Approx. 5′ L x 4′ W …

Used Smith 400B-LS Analyzer

Year: 2006

- One preowned Smith Detection - Model 400B-LS - Mfg. 2006 - Icon Mobility Spectrometry (IMS) a solid or liquid sample is introduced to the analyzer by thermal desorption or direct injection. - The resultant vapours are swept in through the inlet by the carrier gas and ionized. - The product ions are gated into the drift tube and accelerated …

Pouch Form Fill And Seal Machine W/ 125L Tank

Year: 2014

Used Mespack Packaging Machinery H-145 FE Mespack Packaging Machinery H-145 FE Stand-Up Pouch Form, Fill And Seal Machine With Allen-Bradley PanelView Plus 1250 Color Touch Screen Controller and Ilmatec DPC-70L (84.03.0.01.01.1) 125-Liter Reactor Tank, Max. Volume: 500 (cc), Max. Output: 65 (p.p.m.), Max. Format 145 X 240 (mm), Min. Format 80 X 100 (mm), Filling Stations: 4. Date of Manufacture …

3M-Matic A20 Case Sealer

Year: 2009

Used 3M-Matic top and bottom case sealer, model A20, bottom belts, with Paragon case labeler, 3M, built 2009.

Used bundler that is manufactured by ZEPF

Year: 1999

One used bundler that is manufactured by ZEPF. This unit is a model SA-27DL that was manufactured in 1999. This unit comes with an infeed conveyor that goes into a right angle dual lane infeed with a 27 inch wide seal bar. This unit comes with an integrated shrink tunnel and has a cooling fan on the discharge side. This …

Used 3M 700Rks Case Sealer (1 Of 3)

Year: 2013

Mfg: 3M-Matic Model: 700RKS Electrical: 120V / 1ph / 60Hz Controls: Relay Logic Closure: 3″ top and bottom 3M Accuglide tape heads Sizes: Min = 6″ L x 7″ W x 4-3/4″ H . Max = No limit L x 25-1/2″ W x 35-4/5″ H . Weight = 5 to 85 lbs Age: 2013 Condition: Used Footprint: Approx. 48″ L …

used Bartelt horizontal form fill and seal machine Model 9-14

Year:

One used Bartelt horizontal form fill and seal machine Model 9-14 with PLC control with touch screen, Ink Jet coder, notching attachment, zip strip attachment with crushing station, vacuum discharge pick-off, gas flushing attachment, frame extension for notching attachment for standup pouch motor drive: AC electrical: 23-0/460 Volts, 60 Cycles, 3 Phase

Used Belco STC 2016 Bundler

Year: 2016

One used Belco STC 2016 Sealer and heat tunnel bundler. 240 Volt, single phase. Tested 7/20/23 and runs fine

Bartelt RH IM 7-12 Fill Seal Packager

Year:

Bartelt Packager, RH IM 7-12 (7 inch-12 station) w/All Fill B 350E auger filler, horizontal form/fill/ seal, E.M.P. registration control unit, equipped with side seal embossing and mechanical hole punch. It has the position for a second filler head. Tear notch and various types auger tooling setups also available separately. Choose from 2 in., 3 1/2 in., 4 in., or …

KAYAT 601T

Year: 1997

2-15/16" diameter mandrel shaft. Film core inside diameter must be 3-1/16". Tunnel has 2 independent heat zones. Each zone has it's own temperature controller, heating elements and blower. G&L PIC90 PLC, (3)Pacific Scientific SC903 Servo, (1)Allen-Bradley Powerflex 525 and (2)Allen-Bradley 160 VFDs. Electrical: 460V/3ph/60Hz/100 FLA.

Sidel Padloader And Shrinkwrapper

Year: 2007

Registered Film 75 cycle padloader bundler with heat tunnel. Registered film capability. Allen-Bradley controls with MicroLogix PLC and Powerflex VFDs. 242 FLA @ 480V/60hz/3ph.

Fung Yuan Rh 501-S Wrapping Packaging Line

Year: 2009

Used Wrapping Packaging Line, date of mfg 2009-12 power of supply 220V, 3ph, 60hz 14amps

Lantech QAuto Stretch Wrapping Machine

Year:

Lantech Model QAuto Stretch Wrapping Machine Model QAuto (Q1000) Type- Automatic high speed stretch wrapping machine Production speed- approximately 45 loads per hour Maximun load size- 54″ L x 48″ W x 122″ H Minimun load size- 36″ L x 36″ W x 24″ H Maximun load weight- 4000 pounds Turntable speed- 12 RPM Film delivery system- 30″ Additional features- …

Douglas S-60 Tray Shrinkwrapper And Tunnel

Year: 2017

Wraps trays with clear film or Print Registered Film, Speeds up to 60 cases/minute (depending on case size), Film Stand with Allen Bradley Panelview Plus 1000 Touchscreen, Contour Heat Tunnel – Natural Gas Powered, Allen Bradley Servo Logix 5572 PLC with PowerFlex 525 VFD Drives, Allen Bradley Kinetix 6000 Servo Drives, 480 Volts, 3PH, 60HZ, In Production till May 2024, …

Arpac 45Tw-28 Tray Shrinkwrapper with Heat Tunnel

Year: 2013

Last used to shrink wrap cans in trays, 28″ wide seal bar, Clear Film, Single Zone Heat Tunnel, Runs up to 30 packages/minute (depending on case size), 460 Volts, 3 Phase, 60 HZ, Central Point Lubrication, 80 PSI Air Minimum, Turbo Cooling, Allen Bradley Compact Logix L32E PLC, Allen Bradley Power Flex 4M VFD Drives, Allen Bradley Panelview Plus 600 …