Showing 121 - 140 out of 221
Year:
USED MS-32 FRYMA Coball Mill, TYPE MSM-32. ORIGINALLY SUPPLIED WITH CERAMIC CONTACT PARTS. CO-BALL MILL MADE BY FRYMA, 1988, MACHINE NUMBER: M13405. MILLING CHAMBER HAS 4.2 LITRES VOLUME. UNIT IS DRIVEN BY 22 KW/50HZ EX MOTOR. MILL IS EQUIPPED WITH NETZSCH FEEDING PUMP FOR DENSE MATERIALS. SHIPPING DIMENSIONS: 1100MM X 1500MM X 1830MM. TECHNICAL DOCUMENTATION INCLUDED. PREVIOUS USAGE: PHARMACEUTICAL SUSPENSIONS.Year:
One pre owned but never used Sinoped FLP1.5 Fluid Bed Dryer. This unit was never used, prject was canceled prior to the arrival of the equipment. With top Spray and Bottom Spray options. Siemens ControlsYear:
Fitzpatrck Chilsonator, Model L89. This unit features stainless steel product contact surfaces with 2" wide x 8" diameter grooved rolls, horizontal screw feeder with stainless hopper and vertical pre-compression screw variable speed roll motor drive. Includes separate control panel with digital gauges. Mounted on castors for portability. 100 to 400 lbs/hr.Year:
Description: One pre owned Fitzpatrick M5A Pan Feed Fitzmill. Machine features Blades that are sharp/blunt. Unit is on casters for portability. 230 Volt, 3 Phase, 60 Hz.Year: 1982
Grinding capacity 6" x 18" Height under 7" wheel 15-1/2" Longitudinal hydraulic feed 5 to 100 fpm Maximum longitudinal travel 22" Cross hydraulic feed at reversal .01" to .25" Continuous hydraulic traverse feed for truing wheel 10 ipm Continuous hydraulic traverse feed for rapid traverse positioning of wheel 12 fpm Cross hand wheel graduation 0.0002" Cross fine-feed knob wheel graduation …Year: 2019
Used Hanningfield Process Systems cone mill, model M10U, stainless steel construction, underdriven with approximately 2 hp motor, 3600 rpm with integrated Loma flow thru metalcheck, model IQ4 WaferYear: 1998
Used Mazzoni vacuum plodder, type DX M350, two stage single screws, upper stage with die face cutter in vacuum chamber, lower stage with bar forming discharge, individually driven stages with motors and gearboxesYear: 2013
Used GM WAB bead mill, model Dyno Mill RL, stainless steel jacketed chamber, ceramic grinding Dyno Accelerator wheel, 230 volt, 1.1 kw, 1500-6000 rpm motor drive, with product feed hopper, chiller, and controlsYear: 1986
Used Mazzoni vacuum plodder, model Duplex M350, two stage single screws, upper stage with die face cutter in vacuum chamber, lower stage with bar forming conical discharge, individually driven stages with motors and gearboxesYear: 1983
Used Mazzoni vacuum plodder, model Duplex M350, two stage single screws, upper stage with die face cutter in vacuum chamber, lower stage with bar forming conical discharge, individually driven stages with motors and gearboxesYear: 2002
Used Retsch planetary PM400 ball mill, model PM400, with 4 grinding stations less canisters, 220-230 volt, built 2002.Year:
Speed | 3450 rpm |
---|---|
Motor Power | 7.5 kW |
Diameter | 152.4 mm |
---|
Year:
Used 1500 HP Ball Mill. Manufactured by Nordberg. 11'dia x 26'long. 2 compartments. 600V/2000A, DC, 1500 HP Joliet motor and gear box. Available without balls.Year: 2004
Used Diosna high shear granulator, stainless steel construction, model/typ P1/6, 1 kW, with (2) bowls, integrated mixers and choppers, 230 volts (50 Hz)Year:
Used Chemicolloid Industries “Charlotte” Model SD-40 type 316 stainless steel horizontal inline colloid mill. On common base with 40 HP 3/60/230-460 volt 3,560 RPM Motor. Rated up to 1,200 gallons per hour, depending on the product being processed. Last used in the food industry.Year: 2010
Used Retsch planetary ball mill, model PM 100 CM, includes 500ml Stainless chamber, 1250 watts, 120 volt, part# 20.520.0003, built 2010.