Showing 121 - 140 out of 272
Year: 1990
- Model VT300-34, - 34 oz (964 grams), - Camac VLC controls, - 24" x 26" (610mm x 660mm) tie bar spacing, - 37" x 37" (940 mm x 940 mm) platens, - 45" (1143 mm) max. daylight, - Core pull, 50 HP motor, - Dims: 25.25'l x 5'w x 7.8'h, - Weight: 25,790 lbs., - 16,326 operating hoursYear: 200
Specifications Features Shot Size: 13.8 oz. Tie Bar Spacing: 18.1" x 16.1" Platen Size: 26" x 24" Daylight: 35.4" Clamp Stroke: 13.8" Model: EC110V10-2A EQUIPPED WITH: - Injectvisor V10 Control - Air Blow - 220 volt Can be inspected under power. Photos available.Year: 2006
Horizontal Injection Mold (81029) Manufactured 2006 Specifications Features Shot Size: 30.2 oz Tie Bar Spacing: 26.97" x 25" Platen Size: 37.40" x 34.84" Daylight: 48.03" Model: SE280HD-C1600 EQUIPPED WITH: - N-VII Controller - Robot Interface Hours - 113,487 Photos available.Year: 1996
YEAR 1996 BRAND JSW TONNAGE 500 TON SHOT SIZE 53.3 oz. MODEL NUMBER 500 EII TYPE HORIZONTAL MACHINE NOTES VERY CLEAN AND WELL MAINTAINED, SCREW AND BARREL WAS REPLACED IN OCTOBER 2018, SCREW IS HARDENED FROM MSI, THE MACHINE HAS ONLY RAN POLYPROPYLENE SINCE THE NEW SCREW IN BARREL WAS INSTALLED. REPLACED THE MAIN HYDRAULIC PUMP IN APRIL 2021. CLAMP …Year: 2011
Clamping force | 198 T |
---|---|
Tie bar spacing (H) | 561.3 mm |
Shot volume | 201 cm³ |
Screw diameter | 40 mm |
---|---|
Tie bar spacing (V) | 561.3 mm |
Shot weight | 193.2 g |
Year: 2006
245 Ton Toyo Injection Mold Machine Shot Size: 20.8 oz. Tie Bar Spacing: 24.02" x 24.02" Platen Size: 32.28" x 32.28" Clamp Stroke: 20.47" Model: TM-245H2 FeaturesEQUIPPED WITH: - PLCS-11 Controller - Core Pull - Hydraulic K.O. - Robot Interface Currently under power. Photos available.Year: 2005
Clamping force | 22 T |
---|---|
Tie bar spacing (H) | 254 mm |
Shot volume | 30 cm³ |
Screw diameter | 24 mm |
---|---|
Tie bar spacing (V) | 254 mm |
Shot weight | 27 g |
Year: 2003
2200 Ton Van Dorn Injection Mold Machine Shot Size: 265 oz. Tie Bar Spacing: 76" x 62" Platen Size: 102" x 94.5" Daylight: 134" Clamp Stroke: 104" Mold Thickness: 29.9"/73.2" Model: Caliber 2200C12300 FeaturesEQUIPPED WITH: - Pathfinder 5000 Control - 3) Core Pull - Robot Interface Photos available.Year: 2001
model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 mm) platens, 35" (889 mm) max. daylight, 25 hp motor wired at 230v, dims: 19.7'l x 4.5'w x 6.6'h, weight: 16,800 lbs., 52,228 operating hours on 08/01/2022Year: 2005
Vertical Injection Mold 30 Ton Cincinnati Shuttle Mold Machine Shot Size: 1.1 oz. Platen Size: 8" x 10" Stroke: 8" Model: EV30 Features- Mold height: 6"/10" - Xtreem ST Control Hours - approx. 50,605 Photos available.Year: 2018
674 Ton Borche Injection Mold MachineModel BU600 Shot Size: 82 oz. Tie Bar Spacing: 35.83" x 35.83" Platen Size: 47.64" x 47.64" Daylight: 68.9" Model: BU600 FeaturesEQUIPPED WITH: - KEBA Control - PPE Stainless Steel Hopper Feeder - Hydraulic K.O. - Core Pull - Robot Interface Photos available. 2 Machines AvailableYear: 2003
Description Toyo Model Plastar Si-55II-H75U 55 Ton Injection Molding Machine Year of manufacture- 2003 Machine is ALL ELECTRIC Clamp force- 55 tons Clamping system- double toggle Injection unit model- H75U Screw diameter- approximately 26 mm Shot size (PS)- approximately 2 ounces Injection capacity- 3.93 cubic inches Machine weight- approximately 2.7 tons Condition- Very good- machine has beenwell maintainedYear: 2000
120 Ton Toshiba Injection Mold Machine Shot Size: 8.1 oz. Tie Bar Spacing: 18.1" x 18.1" Platen Size: 26" x 24" Daylight: 29.5" Clamp Stroke: 21.7" Mold Thickness: 7.9" min. Model: ISG120NV10-5A Features- Injectvisor V10 Control - Core PullYear: 2015
Manufactured 2015 200 Ton Toshiba Electric Injection Mold Machine Specifications Shot Size: 8.3 oz. Tie Bar Spacing: 22" x 20.1" Platen Size: 31.1" x 29.1" Daylight: 41.3" Clamp Stroke: 17.7" Mold Thickness: 7.9"/23.6" Model: EC200SXV50-U44-48 Features- Injectvisor V50 Control - Tungsten carbide screw & brrel - Transformer for 460 volt - Yushin HOP Sprue Picker available at additional cost.Year: 1999
Clamping force | 220 T |
---|---|
Tie bar spacing (H) | 541 mm |
Shot volume | 20 cm³ |
Screw diameter | 55.9 mm |
---|---|
Tie bar spacing (V) | 490.2 mm |
Shot weight | 568.2 g |
Year: 2012
100 Ton Toyo Electric Vertical Rotary Injection Molding Machine Shot Size: 4.9 oz. Daylight: 9.44"/13.77" Mold Size: 22.64" x 17.12" Model: ET-100VR2 FeaturesEQUIPPED WITH: - PLCS-11 ControllerYear: 1997
Van Dorn DEMAG Model 400-HT-45-0507 (400) Ton Injection Molding Machine – Year of manufacture- 1997 – Clamp force- 400 US tons – Toggle or hydraulic clamp mechanism- toggle – Shot size- 45 ounces – Voltage- 460 – Control package- Pathfinder 2500 – Condition- Good- machine ran until removed from production in August 2021Year: 1992
Description 1992 Cincinnati Milacron Model VH500 (500) Ton Injection Molding Machine Shot Size- 54 oz. Clamp- hydraulic Platen dimensions- 48” x 48” Tie bars spacing- 35” x 35” Daylight- 52” Controls- Camac VEL Electrical requirements- 480V Additional features- – low operating hours- 65,000 hours – inlcudes Corepull – Can be inspected under power