Used 170 Ton Van Dorn Injection Mold Machine

Year: 2000

Horizontal Injection Mold (81049) Manufactured 2000 Specifications Features Shot Size: 8 oz. Tie Bar Spacing: 20" x 20" Platen Size: 29" x 29" Daylight: 35" Mold Thickness: 6"/18" Model: 170HT8 EQUIPPED WITH: - Pathfinder 5000 Control - Auto Tonnage Control - Dual Grease Systems - Premium Oil Filtration - Core Pull - Robot Interface Photos available.


Newbury 80VTCR6

Year: 2003

Vertical Injection Mold 80 Ton Newbury Rotary Injection Mold MachineModel 80VTCR6 Shot Size: 6 oz. Platen Size: 14" x 12" Stroke: 6.38" Daylight: 8"/20.38" Model: 80VTCR6 Features- Mold height: 8"/14" - Pathfinder 3000 Control - Rotary table - Hydraulic K.O. Currently under power.

Jomar Model 135 Injection Blow Molding Machine

Year: 2000

Model Number 135 Year of Mfg. 2000 Brand Jomar Tons 135 Casting Area 77" Blow Mold Clamp 28 Tons Shut Height 10" Press Stroke 6" Max Die Set 22" x 44" Max Swing Radius 35.22 Motor 100 HP Dimensions 149" x 95" x 134" (Estimate) Weight 32,200 lbs (estimate)

Used 250 Ton Milacron Vh 250 Injection Molding Machine

Year: 1993

Shot Size 29 oz. Tie Bar Spacing 22.05" x 22.05" Die Height 9.65" Platen Size 30.7" x 30.7" Daylight 39.19" Voltage 460 Volt 3 Phase 60 Hz

Used 350 Ton Sumitomo Sg350M-H Injection Molding Machine

Year: 1999

Screw 71mm Shot Size 38.2 oz Hours 69,735 (as of 10/25/2022) Shot Count 6,767,360 (as of 10/25/2022) Electric 575V


Cincinnati Milacron VST55 55 Ton Injection Molding Machine

Year: 1994

Clamping force 33 T
Tie bar spacing (H) 259.1 mm
Shot weight 36.9 g
Screw diameter 36 mm
Tie bar spacing (V) 259.1 mm
Platen length 396.2 mm

Nissei NS40-5A 40 Ton Injection Molding Machine

Year: 2000

Clamping force 40 T
Tie bar spacing (V) 309.9 mm
Pressure on material 2377 bar
Tie bar spacing (H) 309.9 mm
Shot weight 31.3 g
Platen length 449.6 mm


Engel ES600/150 Hydraulic Injection Molding Machine

Year: 1998

Clamping force 150 T
Tie bar spacing (H) 500.4 mm
Shot weight 292.6 g
Screw diameter 40 mm
Tie bar spacing (V) 419.1 mm
Pressure on material 2367.6 bar

Cincinnati Milacron NT 330-29 Injection Molding Machine

Year: 1999

Clamping force 330 T
Tie bar spacing (V) 701 mm
Platen length 1031.2 mm
Tie bar spacing (H) 701 mm
Shot weight 184.7 g
Platen width 1031.2 mm

Used 500 Ton Engel Es2000/500 Injection Molding Machine

Year: 1997

Clamping force 400 T
Tie bar spacing (H) 762 mm
Shot volume 1154 cm³
Screw diameter 400 mm
Tie bar spacing (V) 762 mm
Shot weight 1040 g

Used 1100 Ton Van Dorn 1100-265 Caliber Injection Molding Machine

Year: 2002

Shot Size 265 oz Platen Size 68.9" x 59.1" Tie Bar Spacing 55.1" x 45.1" Mold Height (Min-Max) 19.7" – 51.2" Max Daylight 94.5" Controller Patherfinder 3000

Cincinnati Milacron VT165 Injection Molding Machine

Year: 1996

Used 165 Ton Cincinnati Milacron VT165 Injection Molding Machine Brand Cincinnati Milacron Model VT165 Year of Mfg 1996 Shot Size 5 oz Clamp Style Toggle Platen Size 25.6" x 26.8" Tie Bar Spacing 16.7" x 17.9" Daylight Max 35.8" Stroke 2.9" Hours ~ 59,000

Used Cincinnati Milacron Model VL 850-362 Injection Molding Machine

Year: 2016

Cincinnati Milacron Model VL 850-362 Injection Molding Machine – Year of manufacture- 1994- NOTE- this machine was fully and totally rebuilt by Milacron in 2016 – Shot size- 362 ounces – Clamp force- 850 tons – Toggle or hydraulic clamp open/close mechanism- hydraulic – Distance between tie bars- 45.3″ x 37.4″ – Daylight- 96.02″ – Stroke- 52″ – Electrical specifications- …

Used 1992 Cincinnati Milacron Model VH500 (500) Ton Injection Molding Machine

Year: 1992

1992 Cincinnati Milacron Model VH500 (500) Ton Injection Molding Machine Shot Size- 54 oz. Clamp- hydraulic Platen dimensions- 48” x 48” Tie bars spacing- 35” x 35” Daylight- 52” Controls- Camac VEL Electrical requirements- 480V Additional features- – low operating hours- 65,000 hours – inlcudes Corepull – Can be inspected under power

Used Cincinnati Milacron Model VH400-95 Injection Molding Machine

Year: 1995

Cincinnati Milacron Model Model VH400-95 Injection Molding Machine – Year of manufacture- 1995 – Shot size- 95 ounces – Clamp force- 400 tons – Toggle or hydraulic clamp open/close mechanism- hydraulic – Distance between tie bars- 29″ x 29″ – Daylight- 51.2″ – Stroke- 37″ – Electrical specifications- 460 volts/3 phase/60 Hz – Controller- Camac VEL controls – Condition- Good- …

Cincinnati MM880WP

Year: 2006

880 Ton Cincinnati Injection Mold Mach. Shot Size: 60 oz. Tie Bar Spacing: 55" x 42" Platen Size: 78.8" x 58.2" Daylight: 11.8"/88.6" Clamp Stroke: 76.8" Mold Thickness: 11.0"/45.3" Model: MM880WP FeaturesPhoto available.

Used 110 Ton Milacron Roboshot Mold Machine

Year: 1997

Specifications Features Shot Size: 1.68 oz. Tie Bar Spacing: 15.98" x 15.98" Platen Size: 17.72" x 17.72" Daylight: 19.68" EQUIPPED WITH: - Fanuc F-Series 16.1 Controller Photos available.